- Images
- Videos
- 360°
MP360 Planer / Moulder
Product availability and pricing varies by region. Contact your local dealer for more information.
See additional options in the Specifications Section.
4 Cutting Heads
Four cutting heads plane & mould boards on all 4 sides in a single pass into a variety of finished products.
Five Feed Rollers
Four steel and one polyurethane power roller steadily move the board through the machine.
Large Capacity, Small Footprint
The MP360 features a larger material capacity than the MP260 with up to 20” (510 mm) wide x 9” (230 mm) high one-sided planing/moulding capacity, 16” (410 mm) wide x 9” (230 mm) high 2-sided planing/moulding capacity, and a large 13-3/4” (350 mm) wide x 2” (50 mm) high 4-sided planing/moulding capacity in one compact machine. The MP360 side cutters can be upgraded to 4" (100 mm), 5" (130 mm), or 6" (160 mm) to increase the height capacity for 4-sided processing. The 6" (160 mm) side cutter requires an additional spindle extension.
Large Viewing Window
A large viewing window allows the operator to supervise the entire cutting process from rough sawn boards to final products. Inside the machine, the top and bottom horizontal cutters and two vertical side cutters process the material at 6,000 rpm to ensure a smooth and consistent finish on one, two, three, or all four sides depending on which cutters are activated.
| 4-sided processing | |
|---|---|
| Planing Width | 15-350 mm |
| Planing Height | 15-155 mm |
| Min. Material Length | 450 mm |
| 2-sided processing | |
| Planing Width | 15-380 mm |
| Planing Height | 15-230 mm |
| Min. Material Length | 450 mm |
| 1-sided processing | |
| Planing Width | 15-380 mm |
| Planing Height | 15-230 mm |
| Min. Material Length | 450 mm |
| Top Horizontal Cutterhead | |
| Diameter | 88 mm |
| Width | 510 mm |
| Power | 5.5 kW |
| Max. Planing Depth | 5 mm |
| Max. Moulding Depth | 20 mm |
| Bottom Horizontal Cutterhead | |
| Diameter | 72 mm |
| Width | 410 mm |
| Power | 4 kW |
| Max. Planing Depth | 5 mm |
| Max. Moulding Depth | 5 mm |
| Side Cutterheads | |
| Spindle Diameter | 30 mm |
| Max. Height | 100 mm |
| Max. Diameter | 140 mm |
| Power | 3 kW |
| Max. Planing Depth | 5 mm |
| Max. Moulding Depth | 20 mm |
| Power | |
| Total Power | 13.75 kW |
| Power Requirements | 3-phase, 400 V, 50 Hz, 31.4 A |
| Feed System | |
| Power | 0.75 kW |
| Feed Speed | 3-15 m/min |
| Dust Collection Specifications | |
| Dust Extraction Ports | 1x 125 mm 3x 100 mm |
| Recommended Airflow | 4000 m3/h |