EG800 Board Edger
- Hold-down rollers
- Extra Heavy Duty Construction
- Simple Operation. Durable Construction.
The EG800 Manual Board Edger is designed to offer a twofold solution to small and medium-sized sawmills. This robust machine edges material up to 40mm thick at high speeds, making it the ideal companion to the Resaws. It can also be run at slower feed speeds to rip material up to 100 mm thick, making it an affordable alternative to a Gangsaw. Consequently, this product is a truly versatile machine.
This machine’s primary function is to edge boards received from a resaw or a QVS (quad vertical saw). The wide arbor can be packed with multiple blades. By aligning the incoming board accordingly, it is possible to achieve a multitude of product sizes, simply and affordably.
Whichever its intended use, this versatile machine is incredibly robust and easy to maintain. An affordable, hardworking solution for any mill!
- Quick and easy maintenance due to bolt in sub-assemblies
- Variable feed speed, up to 130 m/min
- Can rip boards up to 107mm thick
- Can be used as gang edger
- Heavy duty modular rollers
|Power Selections||30kW (40HP) electric37kW (50HP) electric45kW (60HP) electric55kW (75HP) electric|
|Min Width of Cut||60 mm (2.36")|
|Max. Material Thickness||100mm (4")|
|Blade Speed (RPM)||2955 RPM|
|Number of Blades||4|
|Blade Diameter||375 mm (14 3/4")|
|Blade Kerf||3 - 5 mm (0.118” - 0.195”)|
|Feed System & Operation|
|Feed Speed||1 - 60 m/min|
|Board Kickback Prevention||Anti Kick-back fingers|
|Board Alignment||2 Lasers|
|Material Hold-down||Powered Steel Rollers (large diameter and high traction)|
|Feed Motor||3kW (4HP)|
|Operator Controls||Stationary Control Station|
|Options||Tailer with flat wide belt 1.2m extensionsTailer with flat wide beltTailer with flat narrow beltTailer with chain beltRemote ControlLED 50mm DisplayAdjustable blade with SetworksSawdust belt conveyorExtra infeed and outfeed manual roller tables - 1.6m (5’) long eachLasers for board alignment (4 set of lasers)|
|Machine Dimensions & Requirements|
|Sawdust collection port diameter||150mm (6")|